April 9, 2026 — Passed
9 red flags recorded · 65 minutes on site.
- Discontinue thawing potentially hazardous foods at room temperature or in standing water. Use one of the following approved methods: - Under potable running water of sufficient velocity to wash away loose food particles using water no greater than 70°F for no more than 2 hours. - In a refrigeration unit at 41°F or below - In a microwave - As part of the cooking process
- Rapidly cool potentially hazardous foods from 135°F to 70°F within 2 hours, then from 70°F to 41°F within 4 hours. Discontinue cooling PHF's at room temperature. Rapid cool by any of the following approved methods: 1) Ice water bath 2) Ice wand 3) Shallow stainless steel pans filled 2-3 inches and store in refrigerator 4) Separate into smaller or thinner portions and store in refrigerator 5) Blast chiller 6) Any combination of the above. Use the following approved methods provided on the rapid cooling guideline.
- Maintain nonfood contact surfaces clean. Thoroughly clean and degrease the cooking equipment and shelves above cooking equipment.
- Properly wash hands with hand soap and warm water for a minimum of 10 seconds at the hand washing station when beginning work; before handling food/equipment/utensils; as often as necessary during food preparation to remove soil and contamination; switching from working with raw to ready-to-eat foods; after touching body parts; after using toilet room; contamination of hands occurs. Food employees shall minimize contact with exposed, ready-to-eat food with their bare hands and shall use suitable utensils, gloves, or dispensing equipment.
- Submit additional documents as instructed.
- Ensure all food is separated and protected from potential cross contamination. Store produce and ready-to-eat foods completely separate or above raw foods including but not limited to raw eggs, fish, meat, ratites, game animals, and poultry. Provide adequate sneeze-guard protection, a container that has a tight fitting and securely attached lid, or dispense food from an approved mechanical dispenser.
- Provide walls / ceilings using materials that are durable, smooth, nonabsorbent, light-colored, and washable surfaces. All floor surfaces, other than the customer service areas, shall be approved, smooth, durable, and made of nonabsorbent material that is easily cleanable. Approved base coving shall be provided in all areas, except customer service areas and where food is stored in original unopened containers. Food facilities shall be fully enclosed. All food facilities shall be kept clean and in good repair.
- Provide soap and single-use towels in dispensers, or a drying device at each handwash sink at all times. Maintain all handwash sinks unobstructed and accessible at all times.
- Obtain a state approved food safety certification course within 60 days of operation or when a Food Safety Manager has left the facility. Maintain copies of food safety certificates (food safety manager and food handler cards) on site.