ANTHROPIC PBC

July 16, 2026 — Passed

0 red flags recorded · 9 minutes on site.

No violations recorded on this inspection.

May 9, 2025 — Passed

0 red flags recorded · 15 minutes on site.

No violations recorded on this inspection.

March 20, 2025 — Passed

0 red flags recorded · 90 minutes on site.

No violations recorded on this inspection.

February 28, 2025 — Passed

1 red flag recorded · 60 minutes on site.

• Wall and ceiling finish shall be smooth, durable, easily cleanable, and non-absorbent in all areas where there is food service or preparation, open food storage, warewashing, janitorial service, trash storage, and employee restrooms. (Code 114271)

January 9, 2025 — Passed

6 red flags recorded · 60 minutes on site.

• Floor surfaces shall be coved at the juncture of the floor and wall with a 3/8 inch minimum radius coving and shall extend up the wall at least 4 inches. (Code 114268)
• An adequate, protected, pressurized, potable supply of hot water at least 120F and cold water shall be provided. (Code 114192, 113953)
• The floor finish shall be smooth, durable, easily cleanable, and non-absorbent in all areas where there is food service or preparation, open food storage, warewashing, janitorial service, trash storage, and employee restrooms. (Code 114268)
• Provide minimum 6 inches high side splashguard(s) with rounded corners. (Code 113953, 113953(b))
• Wall and ceiling finish shall be smooth, durable, easily cleanable, and non-absorbent in all areas where there is food service or preparation, open food storage, warewashing, janitorial service, trash storage, and employee restrooms. (Code 114271)
• All new and used equipment and utensils shall be certified or classified for sanitation by an American National Standards Institute (ANSI) accredited certification program, e.g. NSF, ETL Sanitation, UL Sanitation, CSA Sanitation. (Code 114130, 114169)

October 29, 2024 — Passed

8 red flags recorded · 60 minutes on site.

• Materials that are used in the construction of utensils and food-contact surfaces of equipment shall not allow the migration of deleterious substances or impart colors, odors, or tastes to food and under normal use conditions shall be safe, durable, corrosion-resistant, and nonabsorbent, sufficient in weight and thickness to withstand repeated warewashing, finished to have a smooth, easily cleanable surface, and resistant to pitting, chipping, crazing, scratching, scoring, distortion, and decomposition. (Code 114130.1, 114130.3)
• All new and used equipment and utensils shall be certified or classified for sanitation by an American National Standards Institute (ANSI) accredited certification program, e.g. NSF, ETL Sanitation, UL Sanitation, CSA Sanitation. (Code 114130, 114169)
• Food on display shall be protected from contamination by approved a sneeze guard (e.g. vertical glass sneezeguard 60" Above Finished Floor). (Code 114060)
• Equipment for holding cold food shall be sufficient in number and capacity to ensure proper food temperature control. (Code 114047, 114153)
• Submit specification sheets of proposed equipment to DPH for review and approval, prior to purchase and installation. (Code 114130, 114169)
• Wall and ceiling finish shall be smooth, durable, easily cleanable, and non-absorbent in all areas where there is food service or preparation, open food storage, warewashing, janitorial service, trash storage, and employee restrooms. (Code 114271)
• All equipment shall be installed on castors, six (6) inch high round metal legs, or on a minimum four (4) inch high curb or pedestal with a continuously coved base at the juncture. (Code 114130, 114169)
• Adequate and suitable space shall be provided for the storage of food, on approved shelving with a minimum of 6 inch clearance from the floor. (Code 114047, 114153)