SAISON CELLAR SF LLC

March 24, 2025 — Passed

2 red flags recorded · 45 minutes on site.

• Immediately provide hot running potable water of at least 120°F or greater for the entire food preparation facility. (Code 113953(c), 114163(a)(3), 114189, 114192.1, 114195, 114279)
• Obtain a state approved food safety certification course within 60 days of operation or when a Food Safety Manager has left the facility. Maintain copies of food safety certificates (food safety manager and food handler cards) on site. (Code 113947.1-113947.6, 113948)

September 6, 2024 — Passed

0 red flags recorded · 45 minutes on site.

No violations recorded on this inspection.

June 28, 2024 — Passed

8 red flags recorded · 180 minutes on site.

• The floor finish shall be smooth, durable, easily cleanable, and non-absorbent in all areas where there is food service or preparation, open food storage, warewashing, janitorial service, trash storage, and employee restrooms. (Code 114268)
• A food facility shall at all times be constructed, equipped, and maintained, and operated as to prevent the entrance and harborage of animals, birds, and vermin, including, but not limited to rodents and insects. (Code 114266, 114257, 114257.1, 114259)
• Equipment that discharges liquid waste, e.g. food preparation sinks, dishwashing machines, steam tables, ice machines and bins, espresso machines, walk-in refrigeration units, shall have approved indirect drainage through an air gap into a floor sink or other approved receiving vessel. (Code 114193, 114193.1, 114269)
• All permanent food facilities that wash, rinse, soak, thaw, or similarly prepare foods shall be provided with a food preparation sink with a single integral drainboard. The food preparation sink shall have a minimum dimension of 18"x18"x12" (LxWxD) with an integral drainboard at least 18"x18" (LxW). (Code 114163)
• Floor surfaces shall be coved at the juncture of the floor and wall with a 3/8 inch minimum radius coving and shall extend up the wall at least 4 inches. (Code 114268)
• The water supply shall be from a water system approved by the local enforcement agency. (Code 114192, 113953)
• Lockers or other suitable facilities shall be located in a designated room or area where contamination of food, equipment, utensils, linens, and single-use articles cannot occur. (Code 114256)
• An air gap between the water supply inlet and the flood level rim of the plumbing fixture shall be at least twice the diameter of the water supply inlet and may not be less than 1 inch. (Code 114193, 114193.1, 114269)